Capacity utilization
Also called capacity utilisation, operating rate
The share of industrial capacity in use, calculated by the Federal Reserve as an output index divided by a capacity index for manufacturing, mining and utilities. It is released with industrial production.

On this page· 5 sections
A factory that runs one shift is not at its limit. One that runs around the clock with no spare lines is. Capacity utilization puts a number on that gap for a whole sector.
The Federal Reserve publishes it every month for US manufacturing, mining, and electric and gas utilities[1]. These industries, together with construction, account for the bulk of the variation in national output over the business cycle[1].
How it works
Two indexes sit behind the rate. The production index measures real output and is expressed as a percentage of real output in a base year, currently 2017[1]. The capacity index estimates sustainable potential output, expressed the same way[1].
The rate is the seasonally adjusted output index divided by the capacity index, written as a percentage[1][2].
Capacity here does not mean the most a plant could ever make. The Fed’s capacity indexes try to capture the greatest output a plant can sustain with a realistic work schedule, after normal downtime and assuming enough inputs to run the capital in place[2]. A rate below 100% therefore means output is under that sustainable maximum.
The figure arrives with industrial production, in the Fed’s G.17 release, published around the middle of the month[1]. The St. Louis Fed’s FRED database carries the total index as a monthly, seasonally adjusted series[2].
Example
Say that in one month the output index for an industry group is 108 and its capacity index is 135, both on the 2017 = 100 scale.
- Utilization = 108 ÷ 135 = 0.80, or 80.0%.
- Next month, output rises to 110 and capacity, expanded by new plants, rises to 137.5.
- Utilization = 110 ÷ 137.5 = 0.80, or 80.0% again.
Output grew by 2 index points, yet the rate did not move, because capacity grew at the same pace. The rate is a ratio, so it only changes when output and capacity grow at different speeds.
Watch out
The capacity side is an estimate[1]. It rests on a judgment of what output is sustainable, so two sources can define capacity differently and publish different rates.
The rate covers manufacturing, mining, and electric and gas utilities only[1]. It says nothing directly about services or construction.
A rate of 80% means output is 80% of the estimated sustainable maximum. It does not mean 20% of plants sit idle[2].
Sources
- Central bankBoard of Governors of the Federal Reserve SystemIndustrial Production and Capacity Utilization - G.17 (About)Checked November 9, 2026
- Central bankFRED, Federal Reserve Bank of St. LouisCapacity Utilization: Total Index (TCU)Checked November 9, 2026
