Risk-adjusted return
Also called return per unit of risk
Return measured against the risk taken to earn it, so strategies with different volatility can be compared. The Sharpe ratio, excess return per unit of volatility, is the most widely used measure.

- Level
- Intermediate
- Reading
- 2 min
- Sources
- 3Professional bodyResearch
- Updated
On this page· 5 sections
A strategy that returned 18% and one that returned 12% cannot be ranked until you know what each risked to get there. A risk-adjusted return puts the reward and the risk into one number, so strategies with different swings can be set side by side.
The Sharpe ratio is the industry standard for measuring it[1]. William Sharpe introduced it in 1966 as the reward-to-variability ratio, and the plainer name caught on later[2].
How it works
Most risk-adjusted measures share one shape: the return earned above a reference point, divided by a measure of risk. The three best known differ in what they put in each place[1][3]:
| Measure | Return above | Divided by |
|---|---|---|
| Sharpe ratio | the risk-free rate | standard deviation of returns |
| Sortino ratio | a minimum acceptable return | downside deviation |
| Information ratio | a benchmark’s return | standard deviation of the difference |
A higher figure means more return for each unit of risk. The Sharpe ratio is best used on a relative basis, where the investment with the higher ratio is the preferred one[1].
The ratio keeps its value when the position is scaled. Changing the size of a strategy changes its mean return and its standard deviation by the same proportion, so the Sharpe ratio is unaffected[2]. That is why a higher raw return alone settles nothing.
Example
Say strategy A returned 12% a year with 10% volatility, strategy B returned 18% with 24% volatility, and the risk-free rate was 2%.
- A: (12% − 2%) ÷ 10% = 1.00.
- B: (18% − 2%) ÷ 24% = 0.67.
B earned six points more, but A earned more per unit of volatility. To see it directly, scale A to B’s volatility by borrowing at the risk-free rate. At 2.4 times the size, with 1.4 times the capital borrowed, A returns 2.4 × 12% − 1.4 × 2% = 26.0% with 24% volatility. That is above B’s 18% at the same risk, and the ratio is still (26% − 2%) ÷ 24% = 1.00.
Watch out
The risk measure decides what counts as risk. The Sharpe ratio captures one dimension, variance, and it penalizes gains and losses equally. It suits normal return distributions, not asymmetric ones[1].
Compare like with like. Sortino ratios of different funds are comparable only if they use the same minimum acceptable return[3]. Information ratios come in two versions that can differ widely[1]. The Sharpe ratio also depends on the period over which it is measured[2].
A negative ratio says little. Negative Sharpe ratios, which arise when a portfolio underperforms, are uninformative[1].
The figure is a record. Practical implementations use historic results and assume they have some predictive ability, which is an assumption[2].
Sources
- Professional bodyCFA InstituteThe Sharpe Ratio and the Information Ratio (Deborah Kidd, CFA, Investment Performance Measurement, 2011)Checked November 9, 2026
- ResearchStanford University (William F. Sharpe)The Sharpe Ratio (William F. Sharpe, The Journal of Portfolio Management, Fall 1994; author's copy)Checked November 9, 2026
- Professional bodyCFA InstituteThe Sortino Ratio: Is Downside Risk the Only Risk that Matters? (Deborah Kidd, CFA, Investment Performance Measurement, 2012)Checked November 9, 2026
